Share
Print
|
|
|
|
|
When an Engineering Control (GSE) is created, it is then necessary to merge the E/C with a Task Card that is already created. This will then allow the user to open and close work orders and see the amount of time it takes to complete the work order. The Task Card control function allows the user to attach known (existing) Task Cards to this E/C.
When an E/C is added to a Work Order to be complied with, the Task Cards attached to the E/C will be copied into the Work Order. The user can create a Task Card by following the instructions in the 'Task Card (GSE)' section of this handbook. In order to merge or join the E/C with the Task Card, do the following:
Select the Task Card Control 
button. Any number of Task Cards can be added via this option.
Additional information relevant to the record can be viewed and added through the following:
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |