RELEASE HANDBOOKS > TRAX Version 12 > 12 - Technical Records > 12 - Technical Records Switches

12 - Technical Records Switches

ACPNIMPORTDETAIL

When set to Yes and performing an A/C Initial Template Load import, the import will contain the actuals for 5 unique P/N Controls per part number.

Note: In TRAX Version 12, this functionality also applies to the P/N N/L/A Creation import. As well, five new fields have been added to both the A/C Initial Template Load and the P/N N/L/A Creation import: Condition, Accrual Hours, Accrual Cycles, Accrual Days, Birthdate.

When set to No and performing an A/C Initial Template Load, the actuals for the P/N Controls listed in the import will not load into TRAX. The P/N Controls will be listed, but the Actuals will not be included, those fields will be null while the Reset Date will be the current date of the import.

Note: This switch is not new in TRAX Version 12. This switch was created in Version 11, however functionality was added to the switch in Version 12.

ACPNINILOADMULTI

When set to Yes and performing an A/C P/N Initial Load, the NLA parts will be loaded using the A/C P/N Initial Load Multi window instead of the P/N N/L/A Creation window.

When set to No and performing an A/C P/N Initial Load, the NLA parts will be loaded using the P/N N/L/A Creation window.

ACPNLASTRMV

When set to Yes, during an Install Only A/C P/N Transaction, TRAX will validate the P/N being Installed with the last P/N that was removed.

When set to No, during an Install Only A/C P/N Transaction, TRAX will not validate the P/N being Installed with the last P/N that was removed.

DEFERSCHEDULEREQ

When set to Yes, when deferring a Defect Report with a Repeat Number greater than 1, a Repeat Schedule must be entered in order to save the deferral. If a Repeat Schedule is not entered, a hard warning will appear.

When set to No, when deferring a Defect Report with a Repeat Number greater than 1, a Repeat Schedule does not need to be entered in order to save the deferral. If a Repeat Schedule is not entered, a soft warning will appear.

DEFOPTMAND

When set to Yes, selecting an option of the CI, ETOPS, and CDCCL radio buttons of the Defect Report, General tab are mandatory.

When set to No, selecting an option of the CI, ETOPS, and CDCCL radio buttons of the Defect Report, General tab are not mandatory.

DEFREPMEL

When set to Yes, when a Defect Report is deferred to an MEL/CDL, a soft warning message appears if the Aircraft has not completed the specified number of cycles from the last Closed Defect that was deferred to an MEL/CDL with the same ATA Chapter, Section, Paragraph. The switch's Config Number field defines the number of cycles between each deferred defect for the same A/C with the same MEL/CDL Chapter, Section, and Paragraph.

When set to No, when a Defect Report is deferred to an MEL/CDL, a soft warning is not displayed if the Aircraft has not completed the specified number of cycles from the last Closed Defect that was deferred to an MEL/CDL with the same ATA Chapter, Section, Paragraph.

EMOBREQTYPEMAND

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, the Location Site fields will become mandatory in Picklist and Requisition windows.

When set to No, the Location Site fields remain optional fields in Picklist and Requisition windows.

FURNAMEDATE

When set to Yes, when creating a FUR from the Defect Report Detail, Resolution Tab, the naming of the E/C created will be formatted as such: FUR - (ACTYPE) - (CHP) - (SEC) - (auto generated number).

As well, the start date of the FUR will default to the Defer Date instead of the Reported Date.

When set to No, when creating a FUR from the Defect Report Detail, Resolution Tab, the naming of the E/C created will be formatted as such: FUR - (CHP) - (SEC) - (auto generated number).

As well, the start date of the FUR will default to the Reported Date.

QTDEFERCOUNTS

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will show the number of DEFERRED Defect Reports for each aircraft on the Dashboard.

When set to No, QuickTurn will hide the number of DEFERRED Defect Reports on the Dashboard.

QTDEFERPIN

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will ask the user to enter their iOS PIN when deferring a defect.

When set to No, users can defer a defect without authenticating in QuickTurn.

QTGMMCOUNTS

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will show the number of Defect Reports that are marked as GMM.

When set to No, QuickTurn will hide the GMM Count.

QTMELCOUNTS

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will show the number of MEL Defect Reports for each aircraft on the Dashboard.

When set to No, QuickTurn will hide the number of MEL Defect Reports on the Dashboard.

QTOPENCOUNTS

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will show the number of OPEN Defect Reports for each aircraft on the Dashboard.

When set to No, QuickTurn will hide the number of OPEN Defect Reports on the Dashboard.

QTSHOWSYNC

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, the Sync Button will appear on the QuickTurn Dashboard.

When set to No, the Sync Button will remain hidden.

QTTSPIN

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will ask the user to enter their iOS PIN when adding troubleshooting records to a defect.

When set to No, users can add troubleshooting records to defects without authenticating in QuickTurn.

QTREINSPCOUNTS

Note: This switch is only intended for the QuickTurn eMobility iOS app. The switch contains no functionality within the TRAX application.

When set to Yes, QuickTurn will show the number of Defect Reports marked for re-inspection for each aircraft on the Dashboard.

When set to No, QuickTurn will hide the number of Defect Reports that are marked for re-inspection on the Dashboard.