Share
Print
|
|
|
|
|
12 - Receiving Switches
PNECPOSCONT
When set to Yes, the system will allow P/N E/Cs that have Position Controls to be available in the Receiving Inspection and Order Receiving window, and will give users the ability to update the Reset Date of the E/C.
When set to No, the system will not allow P/N E/Cs that have Position Controls to be available inside the Receiving Inspection and Order Receiving window, thus not giving the ability to update the Reset Date of the E/C.
Additionally, with the Switch set to Yes, the Inventory Planner will display P/N E/C parts that are not installed and have a N/A Status.
RNRCVPROTECT
When set to Yes, during Rental Order Receiving, the S/N, Condition, Tool Life EXP and Tool Calibration Number fields will be protected for Tool P/Ns.
When set to No, during Rental Order Receiving, the S/N, Condition, Tool Life EXP and Tool Calibration Number fields will not be protected for Tool P/Ns.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |