RELEASE HANDBOOKS > TRAX Version 12.5 > 12.5 - Production > 12.5 - Production Switches

12.5 - Production Switches

CHECKTROUBLE

When set to Yes, the system will not display the Ongoing Trouble Shooting checkbox for Defects linked to a Non-Routine Task Card where the Repeat NO is greater than or equal to the value specified in the Config Number field.

When set to No, the system will not validate the Repeat No specified in the Defect Report, and the Ongoing Trouble Shooting checkbox will be available in the W/O Task Card window for Non-Routine Task Cards.

CRSCOMPATIBILITY

When set to Yes, the application will check the compatibility between P/N's Approval Certificate and W/O's Approval authority.

When set to No, the application will not check for this compatibility.

LABORTIMECTRL

When set to Yes, the user will not be able to enter a Start/End Time that conflicts with another Start/End time interval that has already been saved for that W/O Task Card. In addition, the user will not be able to surpass the limit (in hours) set up against the Config Number field.

When set to No, the user will be able to enter a Start/End Time that conflicts with another Start/End time interval that has already been saved for that W/O Task Card. In addition, the user will be able to surpass the limit (in hours) set up against the Config Number field.

TCCONFLICT

When set to Yes, the user is unable to Post Complete a Work Order if the W/O Control Sheet has been printed before the old Task Card has been replaced with the most current revision.

When set to No, the user is able to Post Complete a Work Order regardless of whether or not the W/O Control Sheet has been printed before the old Task Card has been replaced with the most current revision.

WOSCHBUFFER

When set to Yes, when an Auto Scheduled W/O is created, the International and Domestic fields will be used as a buffer (in minutes) to calculate W/O schedule start time after the flight arrival.

When set to No, when an Auto Scheduled W/O is created, the W/O Schedule start time will begin upon the flight arrival time.

WOTCCHECKITEMS

When set to Yes, the system will verify whether a Task Card that is being added to a W/O is missing items. A warning message will be displayed to notify users of missing items on the T/C.

When set to No, the system will not attempt to verify if a T/C that is being added to a W/O is missing items.

NRTCTYPEMAND

When set to Yes, the Type field is mandatory for the W/O Non-Routine Task Card.

When set to No, the Type field is not mandatory for the W/O Non-Routine Task Card.