TRAX MANUALS > Engineering > Engineering Module - E/C > Engineering E/C, Update Menu > Engineering Control > Engineering Control Buttons > Economic Analysis Button, via Engineering Control > Engineering Economic Analysis, E/C Parts and Tools Costing Tab

From the E/C Parts and Tools Costing tab, a company can make specifications regarding the financial information associated to an E/C's relevant Parts and Tools Costing. This information can be utilized by a company to more fully assess financial impacts associated to the Engineering Control.

Note: Depending on the customized prints available to a company, the information presented in this tab may be available through various prints/reports.

The following information/options are available in this window:
_____________________________________________________________________________________

Part Information section

PART NUMBER - The Part Number reference for the aircraft part.

PCN - The parts class and inventory number. This number is typically made up of 8 digits (i.e., 'XXX-XXXX' ).

PART NAME - The description of the part.

EIN NUMBER - The Employer Identification Number related to the part.

REMOVAL RATE - The amount of times the part is removed from an aircraft per 1000 flight hours. The number must be between 0 and 1.

W/C - Indicate the Warranty Condition for the part. Users can write 'Yes' or 'No' or any other alphanumeric value.

DISPOSITION - Select from Scrap, Overhaul, or Make Serviceable.

QTY / AC - The quantity of the part per aircraft.

SPARES - The number of spares available.

COST/PART: NEW - The cost of the part when new.

COST/PART: SHOP - The cost of the part when repaired through the shop.

Created By - The user who created the record.

Created Date - The date the record was created.

Modified By - The user who last modified the record.

Modified Date - The date the record was last modified.

Tooling Information section

PART NUMBER - The P/N of the tool needed to comply with the requirements of the E/C.

PCN - The parts class and inventory number. This number is typically made up of 8 digits (i.e., 'XXX-XXXX' ).

TOOL NAME - The description of the part.

QTY / FLEET - The quantity of the part per fleet.

TOOL COST - The cost of the tool.

Created By - The user who created the record.

Created Date - The date the record was created.

Modified By - The user who last modified the record.

Modified Date - The date the record was last modified.

_____________________________________________________________________________________