RELEASE HANDBOOKS > TRAX Version 11 > 11 - Shop > 11 - Shop Switches

11 - Shop Switches

INCASSEM

When set to Yes, the system will general a soft warning when closing the last Task Card on a Shop Work Order if the NHA is an incomplete assembly.

When set to No, the system will not generate a warning when the user attempts to close the last Task Card against a Work Order on a Shop Work Order if the NHA is an incomplete assembly.

SHOPEMPRORATING

When set to Yes, the Shop Employee who is printing the Shop W/O Form 1 Prints must be certified with the required P/N R/O Capability Rating in order to access each print.

When set to No, the Form 1 print in the W/O Shop window does not validate the R/O Capability Rating. A user does not need to have an Authority's corresponding Rating to print the Form 1.

SHOPPNROCAPATH

When set to Yes, the P/N Identification Tag will display the authorities based on the authorities setup against the R/O Capability.

When set to No, the P/N Identification Tag will display both authorities regardless of the R/O Capability setup.

WOTCSHOPITEM

When set to Yes, when an expendable part is populated in the W/O Shop, P/N Information tab, the system adopts a Shop Item field in lieu of the P/N S/N field via the Shop W/O Task Card, General tab.

When set to No, when an expendable part is populated in the W/O Shop, P/N Information tab, the system displays the P/N S/N field via the Shop W/O Task Card, General tab, as per original functionality.