RELEASE HANDBOOKS > TRAX Version 11 > 11 - Planning > 11 - Planning Switches

11 - Planning Switches

OVNDATADAYS

When set to Yes, in the Configuration tab, use the scroll arrow control in the Config Number field to determine the amount of days that will be viewable on the Overnight Station Report tab in the Interactive Planner. The tab will only display when the Overnight Station Report checkbox is selected.

When set to No, the Overnight Station Report in the Interactive Planner view will revert to the default setting and display two days regardless of the value entered in the Configuration tab, Config Number field.

Note: You must log out of TRAX for this switch configuration to take effect.

INTERACTPLANMANHOURS

When set to Yes, the Display Man Hours checkbox is available in the Display by Area section of the Interactive Planner. When selected, the average amount of required daily Man Hours for each Work Order is listed under the Work Order.

When set to No, the Display Man Hours checkbox is not applicable in the Display by Area section of the Interactive Planner. The average amount of required daily Man Hours for each Work Order will not be listed.

PN_EC_INSTDAYS

When set to Yes, the Calendar Days checkbox is available for P/N E/Cs in the E/C, Schedule tab and for the specific P/N Serial Number via the Engineering Effectivity Override. When the Calendar Days checkbox is selected, Planning calculates the P/N E/C's Due Date based on the Calendar Days starting from the E/C's Effective Date. When the Calendar Days checkbox is not selected, Planning calculates the P/N E/C's Due Date starting from the associated part's Installed Date.

When set to No, Planning will calculate P/N E/C Due Dates based on the Calendar Days starting from the E/C's Effective Date. While the switch is set to No, the Calendar Days checkbox in not visible and the system functions as though it is always selected.