Can the Control be automatically reset when associated to a Repair Order? via Adding a P/N Control

Process Flow Topics > P/N Control - General Configuration Topics > Adding a P/N Control > Can the Control be automatically reset when associated to a Repair Order? via Adding a P/N Control

Can the Control be automatically reset when associated to a Repair Order? via Adding a P/N Control

YES: If the Control can be automatically reset when associated to a Repair Order, go to Select the Auto Reset R/O checkbox.

NO: If the Control cannot be reset automatically when associated to a Repair Order, go to Select the Do Not Allow Reset Production checkbox.

This decision pertains to the P/N Control - General Configuration.

See Also

Adding a P/N Control

Is the P/N Control specific to one tail number?

Is the P/N Control specific to a Position?

Is the P/N Control specific for parts that are installed on an NHA?

Is the P/N Control specific to an NLA installed on a specific position?

Will the Control be tracked in Hours?

Are the Hours going to be tracked in flight Hours or Calendar Hours?

Do you want to apply flight Cycles to the Control?

Will the Control be tracked in Days?

Are the Days going to be tracked in flight Days, or Calendar Days?

Do you want to apply a Date Control to the time Control?

Do you want the hours, cycles or days information to appear on certain prints?

Do you want to track tire removal information?

Will an alternative schedule apply for an aging A/C?

Do you want to link the P/N Control to a Shop E/C?

Do you want to associate a T/C or E/C to a W/O when a P/N Control is linked to that W/O?

Can the Control be reset on a Repair Order? via Adding a P/N Control

Do you want the updates of this Control to cascade to P/Ns that exist in inventory?

Do you want the P/N Control information to auto print when the P/N is on a Repair Order?

Should concessions be allowed on this P/N Control? via Adding a P/N Control

Should concessions that require QA Approval be allowed on this P/N Control? via Adding a P/N Control