Do you want the P/N Control information to auto print when the P/N is on a Repair Order?

Process Flow Topics > P/N Control - General Configuration Topics > Adding a P/N Control > Do you want the P/N Control information to auto print when the P/N is on a Repair Order?

Do you want the P/N Control information to auto print when the P/N is on a Repair Order?

YES: If you want the P/N Control information to auto print when the P/N is on a Repair Order, go to Select the Auto R/O Print checkbox.

NO: If you do not want the P/N Control information to auto print when the P/N is on a Repair Order, go to the next decision: Should Concessions be allowed on this P/N Control?

This decision pertains to the P/N Control - General Configuration.

See Also

Adding a P/N Control

Is the P/N Control specific to one tail number?

Is the P/N Control specific to a Position?

Is the P/N Control specific for parts that are installed on an NHA?

Is the P/N Control specific to an NLA installed on a specific position?

Will the Control be tracked in Hours?

Are the Hours going to be tracked in flight Hours or Calendar Hours?

Do you want to apply flight Cycles to the Control?

Will the Control be tracked in Days?

Are the Days going to be tracked in flight Days, or Calendar Days?

Do you want to apply a Date Control to the time Control?

Do you want the hours, cycles or days information to appear on certain prints?

Do you want to track tire removal information?

Will an alternative schedule apply for an aging A/C?

Do you want to link the P/N Control to a Shop E/C?

Do you want to associate a T/C or E/C to a W/O when a P/N Control is linked to that W/O?

Can the Control be reset on a Repair Order? via Adding a P/N Control

Can the Control be automatically reset when associated to a Repair Order? via Adding a P/N Control

Do you want the updates of this Control to cascade to P/Ns that exist in inventory?

Should concessions be allowed on this P/N Control? via Adding a P/N Control

Should concessions that require QA Approval be allowed on this P/N Control? via Adding a P/N Control