Do you want to associate a T/C or E/C to a W/O when a P/N Control is linked to that W/O?

Process Flow Topics > P/N Control - General Configuration Topics > Adding a P/N Control > Do you want to associate a T/C or E/C to a W/O when a P/N Control is linked to that W/O?

Do you want to associate a T/C or E/C to a W/O when a P/N Control is linked to that W/O?

YES: If you would like to associate a Task Card or E/C to a Work Order when a P/N Control is linked to that Work Order, select from one of the following options:

Select the Task Card option from the Related drop down menu and enter the Task Card to associate the P/N Control to a Production Work Order.

Select the E/C option from the Related drop down menu and enter the E/C to associate the P/N Control to a Shop Work Order.

NO: If you do not want to associate the P/N Control to a Work Order, go to the next decision: Can the Control be reset on a Repair Order?

This decision pertains to the P/N Control - General Configuration.

See Also

Adding a P/N Control

Is the P/N Control specific to one tail number?

Is the P/N Control specific to a Position?

Is the P/N Control specific for parts that are installed on an NHA?

Is the P/N Control specific to an NLA installed on a specific position?

Will the Control be tracked in Hours?

Are the Hours going to be tracked in flight Hours or Calendar Hours?

Do you want to apply flight Cycles to the Control?

Will the Control be tracked in Days?

Are the Days going to be tracked in flight Days, or Calendar Days?

Do you want to apply a Date Control to the time Control?

Do you want the hours, cycles or days information to appear on certain prints?

Do you want to track tire removal information?

Will an alternative schedule apply for an aging A/C?

Do you want to link the P/N Control to a Shop E/C?

Can the Control be reset on a Repair Order? via Adding a P/N Control

Can the Control be automatically reset when associated to a Repair Order? via Adding a P/N Control

Do you want the updates of this Control to cascade to P/Ns that exist in inventory?

Do you want the P/N Control information to auto print when the P/N is on a Repair Order?

Should concessions be allowed on this P/N Control? via Adding a P/N Control

Should concessions that require QA Approval be allowed on this P/N Control? via Adding a P/N Control