Share
Print
|
|
|
|
|
DEFSHOP - Defect Report Default Code From Shop
Defect Report Default Code From Shop
Affected Window: w_defect_reports_eu
Switch Set to Yes:
When set to Yes, the default Defect Type, entered in the Config Other field, will appear when creating a new Defect from the Work Order Task Card Work in Progress option.
The following Shop W/O Task Card is available for the creation of a Defect through the Create New Defect button.
With the switch set to Yes, the following Defect Report has a default Defect Type that matches the switch’s Config Other.
Switch Set to No:
When set to No, there is not a default Defect Type, even with information entered in the switch’s Config Other.
The following Shop W/O Task Card is available for the creation of a Defect through the Create New Defect button.
With the switch set to Yes, the following Defect Report has a default Defect Type that matches the switch’s Config Other.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |