Release

Technical Records

A/C Controller Panel

15.14

Expand/Collapse buttons - The following functionality has been added:

Note: These buttons also serve as a drop-down menu. Users can access the following options from the drop-down list: Non-Routine, Defects and W/O. This functionality is customer specific and may not be available to all users.

15.14

Defect Report Detail, Constraint Codes Tab

The Constraint Codes Tab details all Constraint Codes currently associated with the Defect. If a Constrained MEL is associated with a Defect via the Defer Tab, its Constraint Codes will populate this tab. Users can also manually add Constraint Codes using the New button. For more information on adding Constraint Codes, refer to MEL Master, Constraints Tab via the Settings Module.

Defect Report Detail, Resolution Tab

15.14

Reference - The following functionality was added:

Note: When a Defect Report is saved, the Reference field is automatically populated with information associated with the Employee who resolved the defect. This information comes from the Inspector and Stamp fields in the Employee Master. For more information, refer to the General Tab, via Employee Master in the Settings Training Module. This is a customer-specific functionality and may not be available to all users.

15.14

Quick Entry Button, Constraint Codes Tab, via Quick Entry Button

The Constraint Codes Tab details all Constraint Codes currently associated with the Defect. If a Constrained MEL is associated with a Defect, its Constraint Codes will populate this tab. Users can also manually add Constraint Codes using the New button. For more information on adding Constraint Codes, refer to MEL Master, Constraints Tab via the Settings Module.

Release

Technical Records Transaction Codes

15.14

Defect Report Constraint

The Defect Report Constraint Transaction Codes allows users to assign Constraints to MELs and Defects for maintenance purposes. Constraint Codes can be assigned to an MEL via the MEL Master, Constraints Tab. These Constraints will then be associated with any Defect that the MEL is linked to. Users can also manually add Constraint Codes at the Defect level.