TRAX MANUALS > GSE > Ground Service Equipment (GSE) Module > GSE, Update Menu > GSE W/O > GSE W/O Buttons > T/C Work Button, via GSE W/O > Task Card Closing Button, via GSE W/O Task Card Work

The Task Card Closing button allows the user to close Task Cards one at a time. This feature allows the user to manually enter the Task Card information, select a Task Card from the drop down selection menu, or scan the Task Card information using a barcode scanner.

This button is security controlled via the Security Explorer/ Production/ Update/ W/O/ Work Order Task Card Status Update - Closing. For additional information, refer to the Security Explorer via the System Administration Training Manual.

Select the Task Card Closing button to close specifically selected Task Cards as required. If several Task Cards on the Work Order share the same P/N, you will be asked to specify the serial number associated with the Task Card to be closed.

Choose a Task Card(s) and change the status.

Note: The status will be defaulted to 'Closed' automatically upon opening the window.

The user may manually enter the Task Card information, select a Task Card from the drop down selection menu, or scan the Task Card information using a barcode scanner.

Once the Task Card is entered, the Description field will appear populated. Select the Save button to save the Status change.

Note: Task Cards cannot be re-opened once the associated W/O Engineering Control has been reset. However, Non-Routine Task Cards can be re-opened if the W/O E/C has been reset.