Share
Print
|
|
|
|
|
DOCNO - Set Default Path in Config Other Field And Determine Next Sequence Number for Documents
Set Default Path in Config Other Field And Determine Next Sequence Number for Documents
Affected Window: System
Switch Set to Yes:
When set to Yes, the user can default the path of a document file being attached to an E/C through specification in the Config Other field of the switch.
From an E/C, the Document Control 
button is selected. After selecting the New 
button, the Select Document File window automatically opens up to the path set in the Config Other field of the switch.
Switch Set to No:
When set to No, there is no default path for a document file being attached to an E/C.
From an E/C, the Document Control button is selected. With the switch set to No, after selecting the New button, the Select Document File window opens up, but not to any particular path.
Additionally, the Config Number field determines the next sequence number for documents. The start number is set at implementation.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |