TRAX MANUALS > Engineering > Engineering Module - E/C > Engineering E/C, Update Menu > Engineering Control > Engineering Control Buttons > P/N CTL Button, via Engineering Control

The P/N CTL button allows users to set P/N effectivity for the E/C. Effectivity can be applied to specific components (parts) in addition to being overridden down to a specific serial number. Effectivity can be added or removed through the New and Delete buttons as needed.

Note: For a P/N E/C to be called onto a work package via a P/N Control, the P/N S/N must have effectivity set up at the P/N E/C level. For more information, refer to the P/N Control button, via the P/N Master, Settings Training Manual.

The Override button is used to apply specific S/N effectivity if required.

For information regarding Authorization Steps specifically for a P/N E/C, refer to Adding Authorization Steps for the P/N E/C, via Engineering Control.

The following tabs and buttons are available: