TRAX MANUALS > Production > Production Module > Production, Update Menu > W/O Task Card and Non-Routine Search > New N/R Express Button, via W/O Task Card and Non-Routine Search > W/O Non-Routine Task Card Express Buttons > Complete Work Button, via Non-Routine Express

Once the required work has been performed, users working on a Non-Routine Task Card via the N/R Express window can complete work and close the N/R T/C by selecting the Complete Work button.

This button is security-controlled via Production/ Update/ W/O/ W/O Non Routine Express Complete Work Button. For more information refer to the Security Explorer via the System Administration Training Manual.

Notice the following Status is in 'In Progress' window and Work Accomplished has been added.

Once the Complete Work button has been selected, the following prompt appears confirming the work has been completed (the information in the prompt is specific to each N/R T/C and Item). Select Yes to continue.

Note: If there are multiple Items for the Non-Routine Task Card, the first Item must be completed last. If the first Item is attempted to be closed before other following Items, the following error message pops-up:

The W/O Task Card window then pops up with the Status set to Closed and the Work Accomplished listed in the window. Save the window.

Once saved, the following prompt appears explaining that the work has been completed.

The N/R T/C Status is then set to Closed and all fields are greyed out.