Button

Functionality

Bank Button

• The Bank button allows users to add multiple bank information for customer invoices. TRAX displays the Customer Bank information window. Select the New button to create/add a bank record for a specified customer invoice. Populate all mandatory and desired information.

Import Descriptions and Alerts Button

• The Import Descriptions and Alerts button is used to quickly import ATA for new fleets which may not exist in your TRAX ATA DB. This option allows you the vendor to receive or create a digital file listing these ATA descriptions and alerts.

EOS Button

• Select the EOS (Exchange Order Service) button to set up TRAX Interface EOS.

The EOS button is an Interface related functionality. For additional information, refer to your TRAX Interface department.

Individual A/C Selection Button

• The Individual A/C Selection button allows the selection and creation of multiple individual range records using cross reference information for every serialized A/C.

  Note: The Individual A/C Selection button will not be visible in the P/N Effectivity window if switch RANGEHELPER is set to No.

Items Button, References Tab, via the MEL Master

• The References tab of the MEL Master Items window displays informational references to other MELs or Task Cards that are linked to the MEL Item in the MEL's SGML TraxDoc Import. These references are brought in automatically through the TraxDoc import and cannot be added to, or removed from an MEL Item manually.

P/N Effectivity Range Audit Button

• The P/N Effectivity Range Audit button allows users to track the changes made to the P/N Effectivity Range.

P/N Range Button

• A/C Type: This information is pulled from the A/C Master, General tab, via the A/C Master.
• Source: The way that the range was imported/created. This field is updated automatically. The available options are E/C, IPC, and MAN (Manual). The Source is 'MAN' when any part of the range was entered or altered manually.

P/N Software Configuration On A/C Button

• Select the P/N Software Configuration On A/C button to view the configuration of installed software parts on the specified aircraft Type/Series. This installed parts data, along with their Serial Numbers, is initially loaded through the 'As Flying' Manufacturer Data Import. As configured hardware and software components are installed onto aircraft, this information will also be listed in this window. For detailed information on how hardware and software parts are installed onto aircraft, refer to P/N Software Configuration.

System Notification Button

• Users are allowed to add System Notifications for P/N Software Configurations Authorization Steps that notify when a step was opened, closed, or rejected. The System Notification button is available via the P/N Software Configurations Authorization Steps, General tab.

Template Button

• The Template button automatically creates an A/C template by copying 'properties' (P/N Effectivity, P/N Positions, A/C E/Cs, and Task Cards) to the currently selected Aircraft record. The P/N Effectivity, P/N Positions, A/C E/Cs, and Task Cards must be previously set up and made effective to the A/C Type/Series that is defined on the currently selected Aircraft record.

Z-Records Button

• Hoist Hours: The amount of time that the rotor wing aircraft was operating its hoist mechanism. This field can include hours and minutes. This field is only available for Rotor Wing Aircraft. For more information refer to the A/C Type/Series, General Tab via the Settings Training Manual.

• Hoist Cycles: The number of cycles that the hoist was operated. Partial Hoist Cycles may be indicated and measured to the hundredth decimal (i.e., '4.55'). This field is only available for Rotor Wing Aircraft. For more information refer to the A/C Type/Series, General Tab via the Settings Training Manual.

• Hook Hours: The amount of time that the rotor wing aircraft was operating its hook mechanism. The hours in this field can be measured to the hundredth decimal (i.e., '4.55'). This field is only available for Rotor Wing Aircraft. For more information refer to the A/C Type/Series, General Tab via the Settings Training Manual.

• Hook Cycles: The number of cycles that the hook was operated. Partial Hook Cycles may be indicated and measured to the hundredth decimal (i.e., '4.55'). This field is only available for Rotor Wing Aircraft. For more information refer to the A/C Type/Series, General Tab via the Settings Training Manual.

• Landings: The number of times the rotor wing aircraft touched ground while it was loaned out. Each landing does not necessarily indicate a cycle for a rotor wing aircraft. This field is only available for Rotor Wing Aircraft. For more information refer to the A/C Type/Series, General Tab via the Settings Training Manual.