Window
|
New Feature
|
|
|
- ETOPS: Once the ETOPS has been defined at the A/C Type/Series level, this field will be protected and may not be overridden
- Exclude From MXPlan checkbox: Select this checkbox if the Aircraft is not part of the MXPlan Interface
 This checkbox is part of the Sabre Interface. For more information, consult a Trax System Administrator.
- T-PED checkbox: Indicates whether the aircraft is equipped to handle Transmitting Portable Electronic Devices (T-PED) parts
|
|
|
- Spec2K A/C: When a P/O is created and sent to a Vendor, the Spec2K A/C will appear in the Spec2000 Message list
- Configuration: Indicates the type of configuration the aircraft has. This field is informational.
- Livery: Indicates the type of livery the aircraft has. This field is informational.
- IFE: Indicates that the aircraft contains In-Flight Entertainment (IFE). This field is informational.
- Short Fields Perf. checkbox: Indicates the Short Field Performance (SFP) status of the aircraft. This field is informational.
|
|
|
- Freighter/PAX Cargo: Indicate whether the aircraft is utilized for freight, passengers, or both. This is informational only.
- Maximum Thrust: Maximum force that the aircraft can exert. This is informational only.
- MMO: The MMO that can be reached by the particular aircraft. This is informational only.
- Maximum Cruising Altitude: Highest altitude at which the aircraft can cruise. This is informational only.
- Winglet: Indicate and/or specify any winglet of the aircraft. This is informational only.
- Enhanced Cabin: Indicate and/or specify if the aircraft has an enhanced cabin. This is informational only.
- Fleet Age: Age of the fleet the aircraft belongs to. This is informational only.
|
|
|
- Select the Type Series Change
 button to change the A/C Type/Series information of the currently selected Type/Series to a different Type/Series.
|
|
|
- MAREPS: Maintenance Reports Defect
|
|
|
- Tax Office Name: Free text field used to add the name of a tax office used by the customer
- Tax Office No.: Numerical field used to add a phone number for the tax office used by the customer
|
|
|
- Group: To assign a Group via P/N Inventory Level, select into the field and select from the Drop Down Selection pop-up the desired Group or create a new Group by selecting the New
 button
|
|
|
|
|
|
- Related Main Warehouse: The main Inventory warehouse that's related to the currently selected Location. Right-click to choose from all Locations that have the 'Inventory' checkbox selected. This field is informational.
|
|
- Unpaved Runway checkbox: This checkbox indicates that the Location's runway is unpaved. The checkbox is only available when Settings Switch
 GRAVELCONTROL is set to Yes. This functionality helps track the impact of parts installed on an aircraft that lands on unpaved runways. For detailed information refer to Switch GRAVELCONTROL via the Settings Switches Manual.
|
|
- Maintenance Provider: Allows users to add specifications to the selected Location regarding maintenance provision. This field is controlled by a transaction code called Maintenance Provider. This field is informational.
|
|
- Inventory Provider: Allows a user to add specifications to the selected Location regarding Inventory provision. This field is controlled by a transaction code called Inventory Provider. This field is informational.
|
|
- UM checkboxes: Indicates that the Maintenance Provider and/or Inventory Provider Locations is Unmanned (UM). This checkbox is located next to each of the above 'Provider' checkboxes. These checkboxes are informational.
|
|
- Category: The Category code for the selected Location. This field is controlled by a transaction code called Location Category. This field is informational.
|
|
- Allowed Maintenance Location checkbox: Select this checkbox to indicate that this Location is a maintenance location. Only locations with this checkbox selected will appear in the drop down menu that appears when the Allowed Locations Helper button is selected. This button can be found in the Allowed Location Tab which is available throughout the system.
|
|
|
- This tab allows users to enter MEL-specific warning messages that pop-up for Defect Reports with the associated MEL when the defects are created or resolved. If these fields are left blank, the warning messages do not appear in the Defect Report window. This tab is only available when the MEL or CDL radio buttons are selected in the MEL Master, General tab.
|
|
|
- Gravel Control checkbox: Select this checkbox to indicate that this P/N Control will apply the Gravel Ratio (below) to the P/N Control's Actual Cycles when the Aircraft it is installed on lands on an unpaved runway. This checkbox is only available when Settings Switch GRAVELCONTROL is set to Yes. For detailed information refer to Switch GRAVELCONTROL via the Settings Switches Manual.
|
|
- Gravel Ratio: Enter the ratio to be applied to a P/N Control's Actual Cycles as part of the Gravel Control functionality (above). This checkbox is only available when Settings Switch GRAVELCONTROL is set to Yes. For detailed information refer to Switch GRAVELCONTROL via the Settings Switches Manual.
|
|
- Rotor Wing Aircraft Formula: The time control formula for Rotor Wing Aircraft. This active field replaces the RIN field when a Rotor Wing P/N Control is entered. The name of this field depends on the P/N Control selected, as each Rotor Wing P/N Control has a different formula applied to it. For a P/N Control to be designated as a Rotor Wing Control, the Rotor Wing checkbox in the P/N Control must be selected. Once selected, a customizable calculation formula must be selected for the control.
|
|
|
- T-PED checkbox: Indicates the part's Transmitting Portable Electronic Devices (T-PED) status. Only certain parts may be approved T-PED wireless technology. This checkbox allows for the proper inventory management of the T-PED approved parts.
|
|
|
- Alert Rate: This field is used to define the failure rate alert level which will be used for calculating MTBF (Mean Time Between Failures)
|
|
|
- Order Receiving Notes
 button: Select to enter notes that will appear on the Purchase Order Receiving, P/N Information tab once the part has been placed on a Purchase Order and has been received.
|
|
- APU Reading and Recording checkbox: Switch APUREAD no longer controls the APU Reading and Recording. The APU Reading and Recording checkbox does.
|
|
- T-PED checkbox: Indicates the part's Transmitting Portable Electronic Devices (T-PED) status. Only certain parts may be approved T-PED wireless technology. This checkbox allows for the proper inventory management of the T-PED approved parts.
|
|
- Recorder radio button: Indicates that the engine contains a Recorder which has information that can be tracked. Parts with this selection can be tracked via the P/N Engine Recorder Reading window via Technical Records. This radio button is typically used for Rotor Wing Aircraft engines.
|
|
- Prevent Traxdoc Import Update checkbox: This checkbox prevents P/Ns from being updated when a new data import is made in Traxdoc. The import will not affect any previously created parameters for that P/N.
|
|
- Rotor Wing section: This section provides information to calculate P/N Control formulas for Rotor Wing Aircraft. For more information refer to Formulas via the Settings Training Manual.
|
|
|
- The P/N Software Configuration functionality allows users to keep track of Boeing's 787 software infrastructure. This functionality helps manage hardware and software authorizations, inventory availability, current installations, authorizations, revisions, and up-to-date compliance records. TRAX's P/N Software Configuration has been designed for Boeing-specific tools and schema in order to effectively integrate the 787's software necessities with classic TRAX maintenance procedures.
|
|
|
- The P/N Software Configuration, Authorization History tab allows the user to view the authorization history of any P/N Software Configuration.
|
|
|
- The P/N Software Configuration, General tab allows the user to create, delete, import, revise, and view the effectivity for A/C Type/Series.
|
|
|
- Skills that are Inactive will appear in red text in the Skill Master
|
|
|
- Customer Invoice Checked Notification: Message 'Customer Invoice has been completely checked' triggered once an Invoice has been posted in the Customer Invoice Authorization Invoice window
|
|
- P&S Shop P/N Shipped Notification: Message 'Packing and Shipping Shop Part Shipped' triggered when an owned part shipped, indicated through Packing and Shipping record placed in Shipped status
|
|
- Part Removal Notification: Message 'Part associated with an open defect Removal Notification' triggered by an A/C P/N Transaction for the removal of a part associated with an open Defect Report
|
|
- RO/TPW Shop WO Notification: Message 'TPW Repair Order created' triggered when a new Repair Order for a part associated with a Third Party Work Order has been created
|
|
- Shop W/O Post Complt: Message 'Shop Work Order in POSTCOMPLT Status' triggered when a Shop Work Order is placed in Post Completion Status
|
|
- Task Card Update Notification: Message 'Task Card/Non-Routine Task Card Status changed' triggered when a Task Card or Non-Routine Task Card's Status has been changed from Closed to any other Status
|
|
|
- The Vendor Master, EOS tab displays all EOS messages, except for the EOS_ERROR_MESSAGE. All EOS messages are set up via the Exchange Order Service (AeroComponent) messages System Transaction Code.
Note: The EOS_CONFIG.xml file must be uploaded via the Company Profile in order for the ROS tab to be visible in the Vendor Master. For additional information, refer to the EOS Button, via Company Profile which can be found in the Settings Training manual for more information.
|
|
|
- External Receiving Vendor checkbox: Select this checkbox to determine an Actual Received date upon Order Receiving. The Actual Received Date will act as the Customs Received Date. All financial transactions and the exchange rate will be based on this date.
|
|
|
|
Share
Print
