TRAX MANUALS > Planning > Planning Module > Planning, Query Menu > Interactive Planner > Interactive Planner, Aircraft Tab > Selected Work Order, via Interactive Planner, Aircraft Tab

The Selected Work Order Area shows detailed information regarding the Work Order selected in the Display By Area. Select any Work Order in the Display By Area. The Work Order information becomes available in the Selected Work Order Area.

The following information/options are available in this window:
_____________________________________________________________________________________

W/O Tab

The Work Order Tab shows information about the selected Work Order from the Display Area. The Work Order used to categorize, manage, and schedule work requirements for aircraft maintenance.

E/C Tab

The Engineering Control Tab shows all E/Cs that are attached to the selected Work Order. The Engineering Control that specifies aircraft or component scheduled maintenance intervals.

T/C Tab

The Task Card Tab shows all Task Cards that are attached to the Work Order. The Task Card / Job Card that details the scheduled maintenance work.

NRTC Tab

The Non Routine Task Card Tab shows all non-routine Task Cards attached to the Work Order. The Non-Routine Task Card that details non-scheduled maintenance work / findings.

W/O Allowed Location Override Tab

The W/O Allowed Location Override tab is used to recommend locations and/or sites where work can be performed for attached Task Cards and Defect Reports. For additional information, refer to the Work Order Header, Allowed Location Override tab, via the Production Training Manual.

_____________________________________________________________________________________