Share
Print
|
|
|
|
|
ETOPSRECNOTIF - Display ETOPS Notification in Extended Format
Display ETOPS Notification in Extended Format
Affected Window: w_defect_report_eu
Setup:
The following Email notification is set up.
The following User notification is set up.
The ATA Chapter/Section are ETOPS enabled.
A level 2 alert is set up for Chapter 5/Section 13 for 2 defects in 4 days.
The aircraft is set up as an ETOPS aircraft.
Switch Set to Yes:
When set to Yes, ETOPS alert notifications will display in an extended format.
The following defect is created.
A second defect is created.
Upon saving the newly created defect, the user receives the following email notification with the extended format.
The attached PDF also includes the extended format.
The user notification also includes the extended format.
When the user selects into the message, the Note Pad pop up appears which includes the extended format.
Switch Set to No:
When set to No, ETOPS alert notifications will not be displayed in an extended format.
Two defects are created. The user receives the following email notification which does not include the extended format.
The attached PDF does not include the extended format.
The user notification does not include the extended format.
When the user selects into the message, the Note Pad pop up appears which does not include the extended format.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |