TRAX MANUALS > Orders > Orders Switches > TOPNCTRL - Part with Expired Control Cannot be Transfered

TOPNCTRL - Part with Expired Control Cannot be Transfered

Part with Expired Control Cannot be Transfered to a Serviceable Location

Affected Window: w_to_order_detail_eu

Note: This switch does not apply to quarantine locations. Users will be allowed to transfer to quarantine locations.

Switch Set to Yes:

When set to Yes, parts with expired P/N Controls or expired P/N Engineering Controls cannot be transfered via One Step Transfer, Transfer Picklist, or Transfer Order. A hard warning will prevent the transfer.

For example, notice the following part contains an expired P/N Control.

When the One Step Transfer button is selected from Inventory Transaction, the following warning message prevents the part from being transfered.

Note: The same warning appears when attempting to transfer the part via One Step Transfer, Transfer Order, and Transfer Picklist.

Switch Set to No:

When set to No, parts with expired P/N Controls or expired P/N Engineering Controls can be transfered via One Step Transfer, Transfer Picklist, or Transfer Order. A soft waning will inform the user of the expired control, but transfer can be saved.

For example, notice the following part contains an expired P/N Control.

When the One Step Transfer button is selected from Inventory Transaction, the following warning message informs that the part from being transfered has an expired P/N Control. Select Yes to proceed with the transfer; select No to cancel the transfer.

Note: The same warning appears when attempting to transfer the part via One Step Transfer, Transfer Order, and Transfer Picklist.

The transfer can be completed if Yes is selected in the previous prompt.