Share
Print
|
|
|
|
|
RIBIN - Reload Bin At Entrance
Reload Bin At Entrance
Affected Window: w_pn_inventory_ri_eu
Switch Set to Yes:
When set to Yes, when a Bin Location Control is set up for a part, that Bin populates the Bin field during Receiving Inspection. If a Bin Location Control is not set up for a part then the Bin populated during Order Receiving will populate the Bin field during Receiving Inspection.
The P/N has a Bin Location Control set up via P/N Master, Bin CTL 
button.
The P/N is received via Order Receiving; notice the Bin entered is different than the bin specified in the Bin Location Control.
Upon entering the Receiving Inspection window, the bin from the P/N's Bin Location Control is populated in the Bin field, but can be edited if necessary.
Switch Set to No:
When set to No, the Bin populated during Order Receiving will populate the Bin field during Receiving Inspection.
The P/N has a Bin Location Control set up via P/N Master, Bin CTL button.
The P/N is received via Order Receiving; notice the Bin entered.
Upon entering the Receiving Inspection window, the bin from the Order Receiving is populated in the Bin field, but can be edited if necessary.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |