Share
Print
|
|
|
|
|
RNUPDACC - Enter the Rental Accumulated Time on Receiving
Enter the Rental Accumulated Time on Receiving
Affected Window: w_rn_receiving_eu
This switch works in conjunction with Receiving Switch 
RNACCUPRRI. This switch must be set to Yes for the accumulated time window to be displayed in either Rental Receiving or Receiving Inspection, depending on the configuration of Switch RNACCUPRRI.
Switch Set to Yes:
When set to Yes, TRAX will prompt the user to enter accumulated time and update all time controls associated to the part at Receiving for a Rental Order.
The following P/N is going through Receiving for a Rental Order.
Upon saving, the Rental Receiving Part Time Update window appears to enter accumulated time and update all time controls.
Switch Set to No:
When set to No, TRAX will not prompt the user to enter accumulated time and update time controls associated with the part at Receiving for a Rental Order.
The following P/N is going through Receiving for a Rental Order.
Upon saving, a prompt to accumulate time and update time controls does not appear and the Order Receiving for the P/N is complete, which is seen through there being no records for the Rental Order in the Order Receiving window.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |