Share
Print
|
|
|
|
|
ENGCOMP - Upload Engineering Component at Order Receiving or Receiving Inspection
Upload Engineering Component at Order Receiving or Receiving Inspection
Affected Window: w_pn_inventory_ri_eu
Switch Set to Yes:
When set to Yes, the P/N E/C Selection window is automatically displayed when conducting a Receiving Inspection for a P/N that is associated to an Engineering Control to be edited or an E/C can be added through this window.
The following Receiving Inspection is being conducted. Notice the P/N E/C Selection window is available.
Switch Set to No:
When set to No, the P/N E/C Selection window is automatically displayed when conducting an Order Receiving for a P/N that is associated to an Engineering Control.
The following Order Receiving is being conducted. Notice the P/N E/C Selection window is displayed.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |