Share
Print
|
|
|
|
|
RNACCUPRRI - Enter the Rental Accumulated Time in Order Receiving on Receiving or Receiving Inspection
Enter the Rental Accumulated Time in Order Receiving on Receiving or Receiving Inspection
Affected Window: w_rn_receiving_eu
This switch works in conjunction with Receiving Switch 
RNUPDACC, which must be set to Yes for this switch to have functionality.
Switch Set to Yes:
When set to Yes, the user can enter accumulated time and update all time controls associated with the part at the Receiving Inspection for a Rental Order through the Time Update 
button.
The following P/N is going through a Receiving Inspection for a Rental Order.
From the Receiving Inspection, the user can select the Time Update button for the Rental Receiving Part Time Update window to appear to enter accumulated time and update all time controls.
Switch Set to No:
When set to No, TRAX will prompt the user to enter accumulated time and update all time controls associated with the part at Receiving for a Rental Order.
The following P/N is going through Receiving for a Rental Order.
Upon saving, the Rental Receiving Part Time Update window appears to enter accumulated time and update all time controls.
With this Switch and Switch RNUPDACC set to No, the Rental Receiving Part Time Update window will not be available in neither Order Receiving nor Receiving Inspection.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |