Share
Print
|
|
|
|
|
APUMEAN - Mean APU Calculation
Mean APU Calculation
Affected Window: w_ac_schedule_flight_eu_apu
Switch Set to Yes:
When set to Yes, APU Mean Hours and Cycles are calculated based on APU Readings.
In the following example, Mean Hours and Cycles for APU installed on the selected A/C are generated based on manually recorded APU Readings in Technical Records.
Switch Set to No:
When set to No, APU Mean Hours and Cycles are calculated based on A/C Flight Hours and Cycles.
In the following example, APU Mean Hours and Cycles are calculated based on A/C Actual Flights. Notice the Flight Range for the Actual Flights of an A/C can be selected through the Mean Flight/Cycle 
button from the A/C Schedule Flight APU window.
If the Mean Flight/Cycle button is not displayed, check security settings.
After selecting the Save 
button, notice the APU Mean Hours/Cycles are generated based on the A/C Actual Flights recorded in Technical Records.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |