Share
Print
|
|
|
|
|
PLANPNSEQ - Planning P/N Next Sequence Number
Planning P/N Next Sequence Number
Affected Window: w_ac_planning_pn_qry
This switch stores the last value of the sequence numbering for Planning P/N through the switch’s Config Number. It gives a unique number to each row generated in the Planning P/N table. The start number is set at implementation.
This number is used for programming purposes and cannot be viewed by TRAX.
The following Planning P/N has been generated.
Notice after the Planning P/N has been generated, the switch’s Config Number automatically increases to match the number of rows that has been produced in the Planning P/N table.
This switch does not have Yes/No functionality.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |