Share
Print
|
|
|
|
|
SCANBATCHMAND - Scan Batch Field mandatory at Picklist Issue
Scan Batch Field mandatory at Picklist Issue
Affected Window: w_inventory_transaction_picklist_sel
Switch Set to Yes:
When set to Yes, the Scan Batch field in the Picklist Issue Selection window is mandatory; the batch number must be populated to save and picklist issue the part.
In the Picklist Issue Selection window, a batch number has not been entered in the Scan Batch field.
When the user selects the Save 
button, the following warning message appears.
The batch number is entered in the Scan Batch field
When the user selects the Save button they are able to proceed and picklist issue the part.
Once the Continue 
button is selected the picklist issued print is generated.
Switch Set to No:
When set to No, the Scan Batch field in the Picklist Issue Selection window is not mandatory; the batch field does not need to be populated to save and picklist issue the part.
In the Picklist Issue Selection window, a batch number has not been entered in the Scan Batch field.
When the user selects the Save button they are able to proceed and picklist issue the part.
Once the Continue button is selected the picklist issued print is generated.
Share
Print
|
©1997-2026 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |